-
-
-
-
-
PART NUMBER: K1K1 MODEL: 9″ High
For cylindrical locksets 2-1/8” bore, 2-3/8” and 2-3/4” backsets
Free! -
-
PART NUMBER: FR320CPCUSTOM GLAZING BEAD
CUSTOM PROFILE GLAZING BEAD AVAILABLE IN BRASS, BRONZE, ALUMINUM AND STAINLESS STEEL.
-
-
-
-
PART NUMBER: GBB79STANDARD WEIGHT FULL MORTISE STEEL HINGE
2 Ball Bearing, 5 Knuckle design
Template hinge
-
-
PART NUMBER: DR385LATCH PROTECTORS
For use on Cylindrical or Mortise Lockset
Heavy duty 12 gauge steel
-
-
PART NUMBER: FR665CORNER GUARDS
THIS PRODUCT IS USED TO PROTECT WALL CORNERS IN HEAVY TRAFFIC AREAS.
Free! -
PART NUMBER: DR340-10'SNAP-IN LITE KIT
FIRE RATED STEEL GLAZING TRIM WITH SNAP-IN STOP
“THE ONE AND ONLY”
-
PART NUMBER: DR340KITFORM
SNAP-IN LITE KIT – COMPLETE SET
PRE-CUT, PRE-NOTCHED, AND READY TO INSTALL.
-
PART NUMBER: DR340HHORIZONTAL SNAP-IN LITE KIT
2 HORIZONTALS LENGTHS AND 2 VERTICAL LENGTHS REQUIRED FOR COMPLETE LITE KIT.
Free! -
PART NUMBER: DR340VVERTICAL SNAP-IN LITE KIT
2 HORIZONTALS LENGTHS AND 2 VERTICAL LENGTHS REQUIRED FOR COMPLETE LITE KIT.
Free! -
-
Most Popular, Vision Lite Kits
PART NUMBER: DR345SANDWICH-TYPE LITE KIT
SLIM & ELEGANT DESIGN
QUICK AND EASY TO INSTALLFree! -
PART NUMBER: DR345TTHERMAL SANDWICH-TYPE LITE KIT
AVAILABLE IN A VARIETY OF SIZES
QUICK AND EASY TO INSTALL -
Door Reinforcement, New Products
PART NUMBER: DR2017BLSMORTISE LOCK BOX
This lock box is to be used on blank square edge doors.
Material is galvannealed 14 gauge.
-
Production Machinery & Progressive Dies
PART NUMBER:PRODUCTION DIES
WE MANUFACTURE HIGH SPEED PROGRESSIVE DIES, MOULDS, SINGLE STAGE DIES AND FIXTURES, IN-DIE TAPPING UNITS, ETC..
-
Door Pulls, Pulls & Pull Plates
PART NUMBER: DR1875DOOR PULL
DOOR PULLS ARE MADE FROM THE FINEST ARCHITECTURAL BRASS, BRONZE, STAINLESS STEEL, AND ALUMINUM
Free! -
PART NUMBER: FR249SHIMS FOR EXIT DEVICES
SPECIFY PANIC DEVICE AND SHIM THICKNESS WHEN ORDERING.
VIRTUALLY ANY SHIM YOU NEED!
-
-
-
-
Door Threshold, Thresholds, Weatherstripping, Sweeps
PART NUMBER: MK105THRESHOLDS
Extruded Aluminum
Vinyl Insert
-
-
-
-
Door Threshold, Thresholds, Weatherstripping, Sweeps
PART NUMBER: MK115THRESHOLDS
Extruded Aluminum
Vinyl Insert -
PART NUMBER: #18EXIT DEVICE STRIKES
For double doors, handed RHR shown
Specify hand when ordering.
Free! -
-
-
-
-
-
-
-
-
-
-
-
PART NUMBER: FR2002ASA DOOR TEMPLATE
MAKE A FAST AND ACCURATE 4 7/8″ ASA CUT-OUT ON A DOOR WITH THIS TEMPLATE.
-
-
-
-
-
PART NUMBER: FR2003FLUSH BOLT DOOR TEMPLATE
MAKE A FAST AND ACCURATE 1″ X 6 3/4″ FLUSH BOLT CUT-OUT ON AN INACTIVE DOOR WITH THIS TEMPLATE.
-
-
PART NUMBER: #11EXIT DEVICE STRIKES
Strike used only on double doors in conjunction with rim type devices
-
-
-
PART NUMBER: FR200486 EDGE DOOR TEMPLATE
MAKE A FAST AND ACCURATE 8″ MORTISE LOCK CUT-OUT ON A DOOR WITH THIS TEMPLATE.
-
-
-
-
-
-
-
-
PART NUMBER: FR2005HINGE DOOR TEMPLATE
MAKE FAST AND ACCURATE HINGE CUT-OUTS ON A DOOR WITH THIS TEMPLATE.
-
Door Reinforcement, New Products
PART NUMBER: DR2017SCMORTISE LOCK BOX
This lock box is to be used on square edge doors.
Material is galvannealed 14 gauge. -
Door Pulls, Pulls & Pull Plates
PART NUMBER: DR1885DOOR PULL
DOOR PULLS ARE MADE FROM THE FINEST ARCHITECTURAL BRASS, BRONZE, STAINLESS STEEL, AND ALUMINUM
Free! -
-
